Grinkle

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 33 total)
  • Author
    Posts
  • #23552
    Grinkle
    Keymaster

    the back wheel is off the csr

    it’s away having a new tyre on

    #23551
    Grinkle
    Keymaster

    just a thought about exhausts

    i need to replace the exhaust on my chopper

    it currently has 2 into 1 the problem is the headers don’t fit well so it burns out the gaskets

    i like 2 into 1 because of the savaging although i have been told 2 into 2 sound better

    a crossover pipe like the original exhaust seems to be a compromise

    then i remembered the montjuic i used to have (no compromises on one of those)

    it had a full x cross in the exhaust (meant removing the exhaust system to drain the oil)

    it would mean extra cost but would it be worth it when i have the exhaust rebuilt?

    even though its a chop i would not mind an extra couple of horses for the same fuel consumption

    if you have any thoughts please let me know

    apologies to you standard guys (i did not/will not massacre a good un)

    #23550
    Grinkle
    Keymaster

    hi guys

    not sure if you are aware but the site has moved to make more room for pics

    there will also be other improvements in the future

    just stick with it

    we are getting there

    #22175
    Grinkle
    Keymaster

    Hi Ron

    the site is going through changes

    just stick with it

    it will all be sorted soon

     

    #4456
    Grinkle
    Keymaster

    sounds like one of my days

    better luck tomorrow

    it all sorts its self out in the end

    keep us posted on the progress

    #4454
    Grinkle
    Keymaster

    got the shims in the chopper

    went to the bike night at the garage @burnhope again, but not on the bike

    the weather cant make it’s mind up

    #4452
    Grinkle
    Keymaster

    great to see you here

    keep posting

     

    #4447
    Grinkle
    Keymaster

    looks like a very nice job

    #4446
    Grinkle
    Keymaster

    I think the oil leak is from one of the plugs above the inner head bolts

    I knew you had shims but i did not know when you would be on next

    however we will be checking the csr next

    the shims are £7 each

    #4437
    Grinkle
    Keymaster

    looks like the chopper is going to be out of action for a couple of days

    while the top is off we thought it might be a good idea to check the shims

    both exhaust shims checked out ok

    both the inlets were tight (zero clearance)

    next problem get the shims out

    trying to figure out how the batman sign worked

    ok got it. easy when you know how. lol

    the shims i had lying around were all to big

    a phone call to a local dealer. they said they had shims, the next size down and a selection

    my brother went and got shims but they did not have the size the said they had. this turned out not to be a problem because the shims they supplied were the wrong size (not 32mm)

    my brother went back to the shop and got the only 3 32mm shims they had

    we put a smaller shim in and worked out we needed 2x 265 shims but only had one that size

    back on the phone tried another bike shop who said they keep them in the workshop but would not sell any

    next on the phone was the nearest kawasaki dealer who told us they don’t keep them in stock but could order them

    back on the phone to the first shop again. ordered shims which should be in on tuesday

    hardly worth putting the top back on, re-tensioning the cam chain,new gasket, etc. just for two days

    #14227
    Grinkle
    Keymaster

    Here is one to chear you up lol
    http://www.youtube.com/watch?v=j3qIBHStUc0

    #4433
    Grinkle
    Keymaster

    I have a bit of an oil leak

    It’s coming from the top of the engine

    #4432
    Grinkle
    Keymaster

    Thursday night was bike night at the garage, burnhope

    I will try to remember to get pics next time

    If you are on facebook you should be able to look it up and get more info

    here is the official site www.garagebarandgrille.co.uk/gallery

    #4430
    Grinkle
    Keymaster

    Had i ride to the wetlands centre at washington tonight

    the turn out there was very poor usually there are a lot more bikes

    (It would not let me post in meets)

    My brother and I were there

    we went on from there to sunderland

    my cousin bought a 750 today so we went to help him unload it from the van

    unfortunately it’s a yamaha triple (1979 so still a classic)

    good news is the battery on the chopper seems to be charging now

    and the extra tooth on the front sprocket makes it not rev so much

    #4429
    Grinkle
    Keymaster

    today I changed the front 16 tooth sprocket for a 17 tooth one

    and changed the oil filter o-ring so hopefully it wont drip any more

Viewing 15 posts - 1 through 15 (of 33 total)